How is an exposed aggregate driveway laid?
Most of the job is the same as a plain concrete driveway. The difference is at the end, when the surface paste is removed to show the stone. A typical sequence:
- Remove the old driveway and dispose of it.
- Excavate, then lay and compact the base.
- Set up formwork and reinforcement.
- Pour concrete made with the decorative stone mix you've chosen.
- Treat the surface so the top layer stays workable while the concrete below sets.
- Wash and brush off the top layer to expose the stone.
- Cut control joints.
- Clean and seal the surface once it has cured.
